Easydrum dewind assembly instructions

1. Remove drum lid.

2. Remove the steel clamping bar by releasing the rubber band.

 1. Locate the wire basket over the inner bore and locate in the slots of the plastic ring.(NB Wire basket is reuseable)

 2.Release the start end of wire and thread out of the drum on the outside of the plastic ring.


1. Position the dewinder equipment over the drum.

2. Thread the wire through the flexible spring and into the stitcher.



It is very easy to get in touch with us.

Call us at +(44)  01246 452121

or e-mail us using the Contact Form.